Ypsomed

YpsoPump: Eight Weeks Old!

5 Comments

I was full of enthusiasm when I learned that I would have the opportunity to road test a new diabetes toy in the YpsoPump.

The YpsoPump does have a fair few differences to traditional insulin pumps, but for the majority of my eight week adventure these differences were far outweighed by its sleek and lightweight nature.

With a stockpile of supplies belonging to my late Animas Vibe sitting in the wardrobe, I made the decision to pull my old pump out of retirement two weeks ago. It actually has reminded me of some of the features that I have been missing.

One of my biggest issues with the YpsoPump has been occlusion alarms. Unfortunately, at least 1 or 2 infusion sets in each box that I have used so far have triggered occlusion alarms. There have been no visible signs of site failures such as kinking or bleeding. High blood sugars clearly indicated that insulin was not getting through, however the alarms only seemed to trigger during a decent bolus of at least 3 units.

I’ve been connecting to a new infusion site at mealtimes where I’ll give a decent bolus, hoping that any occlusions will be triggered. I have reported the issue to Ypsomed with little answer, although I was pleased that my level of diabetes knowledge was acknowledged over the phone. I do wonder if this is simply an issue of me being too thin and lacking enough tissue to cushion the cannula beneath my skin.

I do also miss having the option of having infusion sets that sit on an angle beneath my skin. I can really feel the Ypsomed sites ‘digging in’ when I’m lounging on the couch or sleeping. The marks and bumps left on my skin after removing an infusion set also seem bigger, presumably from the sets ‘digging in.’

Being fairly thin, I don’t think the Orbit inserter is the best practice for me to apply a new infusion site. Inserter devices didn’t agree with me on my late Animas Vibe. While my experience was better than the Animas insets, I definitely intend on manually inserting my sets when I next use the pump.

The one thing I would change about this pump is its lack of a built in bolus calculator. While performing bolus calculations on my iPhone is largely okay, I have found myself slacking off here and there. I’d also like to see more customisation in Ypsomed’s bolus calculating app, such as being able to adjust insulin to carb ratios for things like physical activity.

It was also far too inconvenient having to wait for the app to sync with the pump for insulin data to perform a bolus calculation. Bluetooth was also a significant drain on the pump’s battery. I have since switched the bolus calculator to Multiple Daily Injections mode, instead relying on my ability to log all of my bolus calculations to obtain accurate insulin data. With Bluetooth switched off, I’ve also managed to get a more decent 21-24 days from an Energiser AAA battery.

The thing I like most about the YpsoPump is its sleekness, size and lightweight nature. I have definitely missed that in these past two weeks, especially when I’m travelling and have other things to carry around in my pocket as well. I feel confident that I can live with those differences in return for its weight – particularly in the Summer, when pump complacency is a real issue for me.

The YpsoPump has definitely been a learning curve over these past eight weeks, but as with all other aspects of managing diabetes, I’ve learned how to best make it work for me.

Disclosures: Ypsomed Australia provided me with a YpsoPump, infusion sets, reservoirs and an inserter to trial at a launch event in Sydney. There was no expectation that I would blog, or even trial the pump itself. All opinions expressed here are, as always, my own. 

YpsoPump: The First Few Weeks (Part Two)

2 Comments

I’ve been road testing the new YpsoPump that launched in Australia last month. If you missed the first half of my review, you catch up here. 

I must admit that I was a little intimidated at the prospect of using Ypsomed’s Orbit inserter to place infusion sets on my stomach. When I last used the Animas insets two years ago, it was a terrifying experience. The insertion process with the disposable plastic insets were so clunky, leaving me with little confidence in whether my insertion was a success, or whether the cannula had kinked on the way in. I can still recall one tumultuous night where I didn’t pick up on a kinked cannula until several hours later when I had high blood sugars and moderate ketones.

Thankfully, I’m finding that the YpsoPump’s reusable Orbit inserter device does a far more efficient job. The plastic cannula that sits underneath the stomach feels much stronger than the Animas sets, which would also help with kinking as well. The infusion sets can also be inserted manually.

The area does feel a little tender after the pressure from the insertion, compared to the gentler manual Animas sets that I’ve been using. Thankfully, this hasn’t been a sign of any site failures. I’ve been cautiously doing my insertions 12-24 hours prior to switching the site, so that I’ll be able to pick up any signs of a site failure. I’ve had one bad site placement so far, and I was able to pick it up straight away (it was just a bit of blood).

I really like that if you do happen to place your site badly, you can simply clip it back onto the Orbit inserter and try again, compared to an inset which is rendered useless once it comes away from the insertion device. It’s also nice to have a reusable inserter device that doesn’t create so much plastic waste like the disposable insets.

Ypsomed’s Orbit infusion sets are cleverly designed to rotate 360 degrees. The end of the pump line clips into place over the top of the infusion site, rather than having to be clipped rigidly into the side of a set.

The downside to this design is that it is challenging to check the skin where the infusion set is placed for any signs of bruising and bleeding. I’m slowly getting used to seeing through the purple coating, with a little help from my iPhone torch.

The sets seem to stick well enough at the centre, although they do tend to come loose around the edges after showers. One thing I am enjoying is less sticky residue left on my skin after removing an infusion site.

There is a choice of Orbitsoft plastic infusion sets (6mm and 9mm) and Orbitmicro steel infusion sets (5.5mm and 8.5mm), with each available in lengths of 45cm, 60cm, 80cm and 110cm. I did try one of the steel sets, but I think I am a bit weirded out by having a needle permanently underneath my skin. While it worked just fine for three straight days, I can’t say that it was as comfortable as the plastic.

Ypsomed’s glass reservoirs hold 1.6ml of insulin, which is slightly less than the 2ml capacity of Animas and may be a consideration for people on larger insulin doses. We were told that insulin in the glass reservoirs could be used in the YpsoPump for up to 7 days, or stored in the fridge for 30 days.

I was also in disbelief as the pump continued to run for up to five minutes while I was changing the battery. There’s no more having to rewind and re prime the insulin cartridge, or worry about losing information about insulin on board. Since I stopped syncing with the mylife app and switched off the pump’s Bluetooth last week, I’m expecting to get around 3 weeks from the AAA alkaline battery.

When I caught up with one of the Ypsomed reps in Perth last week, I expressed just how much I want to hear from other people who have used new diabetes tools and technologies. Even during the pilot phase when I had no idea that I would be getting a pump, Ashley’s insights were so valuable.

People with diabetes need to be part of the conversation, and I’m super grateful that Ypsomed included us in their launch – which is especially generous considering they are relatively new to Australia.

The YpsoPump is available in Australia now. Subsidised consumables are available through the NDSS, although I’ve been told to expect a 7 to 10 day delay as my Pharmacy’s supplier doesn’t carry them. Which is understandable, given it’s a new product and the demand probably isn’t there yet.

A large group of Diabetes Educators attended pump training in Sydney last month, and Ypsomed has also been travelling around to various clinics around the country to train further healthcare professionals. So if you would like to get started on this pump, I am confident that you will be able to find a trained healthcare professional near you.

According to CDE Amy Rush of the Telethon Type 1 Family Centre in Perth, you may be able to get a YpsoPump before your pump replacement is due and Ypsomed will liaise directly with your health fund. I don’t know the details personally, but you can watch Amy’s video here.

If you haven’t already noticed the enthusiasm in this post, I genuinely am still brimming with enthusiasm for this pump four weeks in. I think the size, weight and sleekness of this pump are the real selling points for me.

After the pump complacency and health insurance issues that I’ve dealt with recently, the YpsoPump could not have come along at a more perfect time to help me feel re-energised in the daily grind. I officially ordered a second box of infusion sets last week, and am feeling quite optimistic about our future together.

YpsoPump: The First Few Weeks (Part One)

4 Comments

I’ve been staring at my chunky old Animas Vibe with its holes in the coating and an interface from the ‘90s, thinking about how I will possibly be able to while away another two years before its warranty is up. I’ve been dreaming up scenarios in my mind where new pump options would arrive on our shores and be rolled out to existing Animas customers sooner rather than later.

But I never, ever, really imagined that I would have one of these exciting new options in my hands so soon.

(This is the part where I tell you that Ypsomed Australia provided me with a YpsoPump and consumables to take home and trial. Followed by the part where I tell you that was no expectation that I would write, or even trial the pump itself. Followed by the part where I remind you that there’s a bias in place and that you should take my enthusiasm with a grain of salt).

I’ve been YpsoPumping for almost four weeks, and I am absolutely loving how sleek and light it is. When I started pumping insulin two years ago, I wanted it purely for the benefit on my blood sugars. I never thought that this sleekness was something that I could ever ask for, or want, in a pump.

It weighs eighty three grams, inclusive of a AAA alkaline battery and filled insulin cartridge. To put that into perspective, It’s about half the size of my wallet and a third of the size of my iPhone. Did I mention that it’s slimmer, too? I hardly notice it in my pocket when I’m lounging on the couch or in bed at night.

It’s also way quieter than my late Animas Vibe. I no longer hear the swish of insulin boluses being delivered. Or that little ‘tick’ every three minutes as the pump infuses basal insulin into my body.

The interface is made of up of predominantly symbols and numbers, rather than words, which definitely took some getting used to.

It also has a touch screen, which can only be switched on by pressing the button on the side of the pump. The main menu also has a three tap access code before you can go in and administer insulin.

Basal rates can be set in increments of 0.01 units per hour, which gives greater customisation than the 0.25 units on my late Animas. The biggest challenge for me is that they can only be set on the hour, rather than the half hour. So when I wake up at 6.30am, I can only set my elevated waking basal rate to run from either 5am or 6am, rather than my ideal time of 5.30am. I’ve been experimenting with some basal tweaks this week, and hopefully I’ll be able to work around this.

I’m also liking the vibrating reminders when my temporary basal rate is finished running. I tend to sleep over middle of the night alarms, but the pump has even woken me up during the night to let me know a temporary basal rate has finished running. It’s a really handy feature to have, reminding me to check my blood sugar and evaluate whether I need to run it for longer.

The biggest difference to my late Animas is that the YpsoPump does not contain a bolus calculator. That is contained in the companion mylife smartphone app. Or any other bolus calculating app, for that matter. So you would need to open your app, work out your bolus, and enter that number into your pump. The app then syncs with the pump via Bluetooth to obtain insulin data. At the launch event, we were told that the pump could eventually be controlled from the app.

I have no problem using a phone app to calculate insulin boluses. I’ve done it before when I’ve taken pump breaks. But I found it frustrating having to wait a good 15 seconds for the app to sync with my pump so that I could do a bolus calculation. I’m so used to being able to quickly glance at my insulin on board during the day before various activities. Not to mention that having my Bluetooth constantly switched on is a drain on both my pump and iPhone battery. As a result, I must say that I’ve been slacking off on bolus calculations.

I expressed to the rep last week that it would be helpful if the bolus calculator worked independently of having to sync with the pump. After suggesting that I could switch my insulin therapy settings to Multiple Daily Injections, I’ve been able to do just that. So long as I’m logging all of my bolus calculations and insulin doses in the app, I’ll be able to see my insulin on board without having to sync the pump via Bluetooth.

The pump can deliver insulin boluses in increments of 0.1 units, which is slightly less than the 0.05 my late Animas allowed. The bolus calculator automatically subtracts insulin on board from a bolus calculation, which might not always be necessary. It also lacks the flexibility to make adjustments to insulin to carb ratios or insulin sensitivity factors for things like physical activity. However, it is working a lot better for me in MDI mode.

I know just how hard a good bolus calculator is to find, and for me a diabetes app without one simply has no value. Ypsomed do appear to see the bigger picture of people who don’t use pumps and CGMs, and I’m confident that the company is working hard to make Multiple Daily Injections and glucose monitoring ‘smarter’ as well.

If you are looking for a bolus calculator, you can search for the ‘mylife app’ in your Google Play or App Store.

Come back tomorrow for part two of my review of the YpsoPump!

Updated: Find part 2 here!

The YpsoPump Launch Event

1 Comment

My first week with the YpsoPump saw me in holiday eat-and-bolus-without-really-thinking-too-much-about-diabetes mode. Not to mention that it was my return to insulin pumping following a month long break. Week two saw me back at home with one of the worst Winter colds I’ve had in years and some of the craziest insulin resistance I’ve seen. It’s now week three and I’m just beginning to return to some sense of normality with the ‘betes.

Safe to say, I feel as though I’ve already been through a lot with this pump in the short time we’ve known each other. I really am enjoying the YpsoPump for its sleekness and light weight nature, and you can also check out my Instagram stories for more insight here. I’ll have some more to share here soon, I just don’t think I can fairly review a pump without using it for a good few weeks.

I had never even heard of the YpsoPump prior to searching the TGA website earlier this year in desperation for any signs of new insulin pump choices following the demise of Animas. I then noticed fellow blogger Ashley of Bittersweet Diagnosis had been trialling the YpsoPump, indicating that an Australian launch was on the horizon. A bit later on, I was fortunate enough to receive my own invitation to a launch event held in Sydney three weeks ago.

We were introduced to a Swiss company called Ypsomed (pronounced “Ipsomed”). As a manufacturer of tailor made insulin injection pens and autoinjectors, the company vision is to make self care simpler and easier. We were told that the company had a long, successful history of insulin pumps in the world, dating back to 1985. The YpsoPump had been designed to fill the gap in a market filled with complex, medical looking devices.

Ypsomed’s portfolio of diabetes products fall under the company’s Mylife Diabetescare brand. Encouragingly, their portfolio extended to people on Multiple Daily Injections and structured blood glucose monitoring. Products included clickfine needles, lancets, injection pens and a new Unio Neva blood glucose monitor using a custom brand of test strips. Not to mention that YpsoPump’s companion ‘Mylife’ smartphone app would also be useful to people not on a pump (it’s a free download from your App or Google Play store).

We were shown a roadmap of future upgrades to the YpsoPump system. This included the addition of the Unio Neva blood glucose meter that would send blood glucose readings to the Mylife smartphone app via Bluetooth. Ypsomed are also in discussions with manufacturers to add CGM integration into the pump. The YpsoPump will eventually be able to be controlled remotely via the smartphone app, but this looks to be at least 12-18 months away.

Ypsomed is also manufacturer of the wildly popular Omnipod tubeless insulin pump, which received TGA approval some time ago but has not yet managed to surface. The NDSS funds insulin pump consumables here in Australia, while private health insurers fund the actual device. Ypsomed have not been able to find a way to fit the funding model here in Australia due to the disposable nature of the Omnipod.

In response, we were told that a smaller ‘YpsoPod’ is currently in development with an expected 2021/22 completion. One half is disposable while one half is durable, meaning that this pump would fit the funding model in Australia.

Everything sounded really encouraging, with Ypsomed assuring us that they are here to stay and committed to the Australian market. This includes a dedicated Australian based customer service team. I’m also looking forward to catching up with a member of the Ypsomed team visiting Perth this week.

At the end of the day, more choice for people with diabetes is always a good thing. A massive thank you to Ypsomed Australia for having people with diabetes there.

Disclosures: Ypsomed Australia covered my travel and accommodation expenses to attend the launch event in Sydney. I was fed and watered across the duration of the event. I also received a YpsoPump and consumables to take home and trial. There was no expectation that I would blog about Ypsomed or the YpsoPump. My opinions and my time, including the annual leave I took from work to attend, are my own.